The boat can be equipped with a 230V/110V air conditioning (AC) as an optional system. Depending on the selected setup, the air conditioning allows climate control in the main cabin, the front cabin, and the aft cabin.
The optional air conditioning system consists of an air conditioning unit, a water pump, a strainer, a water intake valve and a ducting arrangement.
The air conditioning is controlled by control panel displays located in the main cabin and front cabin. When you set the desired temperature from the control panel displays, the unit automatically activates when the ambient temperature goes over or under the set value.
Before starting the unit:
-
Ensure the sea water intake valve and the sea water outlet valves are open. The location of the valves is presented in the section Openings in the hull and deck.
-
Ensure that the air conditioning circuit breaker is switched on.
Running the air conditioning unit when the water intake valve is shut can cause the unit to overheat and get damaged.
- (1)
-
Optional AC water intake valve
- (2)
-
Optional AC water pump and strainer
- (3)
-
Optional AC unit
Maintenance
-
Check and clean the air filter near the air conditioning unit monthly.
-
Inspect the sea water circuit regularly for leaks.
-
Inspect the electrical wiring and electrical connections annually for corrosion and firm seating.
-
Coolant refills should be performed by a certified service provider.
Refer to the supplier’s manual for complete operations, maintenance, and warranty instructions. In case of the air conditioning unit fails, please contact your boat dealer.