Depending on vessel model and components, every task might not be relevant.
MAINTENANCE LOG |
Frequency |
||||
---|---|---|---|---|---|
Task to be performed |
Every trip |
Every month |
Every 3 months |
Every 6 months |
Annually |
Bilge system - Remove, clean and inspect bilge pump, check valve and its surroundings for damage or debris that may reduce the performance of the pump |
|
||||
Waste system - Replace the no-smell carbon filters |
|
||||
Waste system - Run the macerator pump |
|
||||
Heating system - Run the heater for 10 minutes |
|
||||
Air conditioning system - Clean air filter, seawater strainer and check the system for leaks |
|
||||
Water system - Clean inline filter |
|
||||
Inspect Zinc anodes - Replace all zinc anodes if 50 % has been eaten up |
|
||||
Fire extinguisher inspection |
|
||||
CO alarm - Push test button for 1 sec |
|
||||
Smoke alarm - Push test button for 3 sec |
|
||||
Seacocks - Turn handle Open and Close |
|
||||
Batteries - Charge state, terminals securely attached and free from corrosion |
|
||||
LPG system - Check condition of LPG lines, connectors and LPG shut off valve |
|
||||
Fuel system - Check condition of fuel lines, connectors and fuel shutoff valves |
|
||||
Inspect fuel tank compartment bilge for water |
|
||||
Livewell pump - Check condition of hoses and connectors |
|
||||
Gelcoat waxing |
|
||||
Clean hull & deck from saltwater |
|
||||
Keep bilge dry and clean |
|
||||
Boat covers - Clean upholstery covers and sunroof cover |
|