The main bait livewell is in the centerline of the boat. It contains a 125-liter (33 US gallons) baitwell and a tackle station compartment to keep your lures and reels neatly organized and ready to use. The main baitwell utilizes the sea chest of the raw water system for aerated water.
The pump’s switch and baitwell light switch are located on the switch panel on the bow facing the wall of the main baitwell. The water intake valve is located under the aft deck hatch on the sea chest bow facing wall.
To start the seawater circulation, make sure the sea chest through-hull water intake valve and baitwell water intake valve are open and switch on the pump from the switch panel.
The baitwell drain is operated by electric valve. To drain the baitwell empty, open the valve with the Drain livewell switch button.
The raw water system intake valve must be open for the baitwell pump to get water.
Inspect and clean the overflow drain and pump strainer from gunk after each use.
-
Clean the inside of the baitwell with distilled vinegar and hydrogen peroxide.
-
Circulate freshwater through the system a few times to rinse it.
Avoid using harsh cleaners, as they can cause the bait fish to die.